OK Phil. I supposed I was confused where you said " My K3S actually
transmits a signal when in TEST mode!" I didn't find any measurable
output when in TEST mode using my K3S.
Thanks.
73
Bob, K4TAX
On 9/29/2015 12:52 PM, Phil Hystad wrote:
In Test mode there is no signal output at all. That is the reason for Test
Mode. So, on the P3, you don’t see a signal and you don’t see signal power
level. But, the fact that the SWR bar chart shows something is, to me, an
anomaly.
73, phil
>On Sep 29, 2015, at 10:34 AM, Bob McGraw - K4TAX<[email protected]> wrote:
>
>At what power level do you see or measure this signal? I don't seem to see
any power output in TEST mode during transmit.
>
>73
>Bob, K4TAX
>
>On 9/29/2015 12:23 PM, Dan Atchison wrote:
>>Phil:
>>
>>Do you have a K3S by any chance. My K3S actually transmits a signal when in
TEST mode! When I told Elecraft about it, they shrugged their heads like it can't be.
>>
>>The TX power appears both on my P3 (with TX MON showing both PEP and SWR),
and also my LP-100A wattmeter. It's only very, very short bursts of my CW sent
signal, but it's there. My K3 does not do this.
>>
>>As mentioned, I see this with TEST on and either VOX on or off. Have never
noticed on sideband.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
