Steve — Sounds like that is indeed what is happening. I may look into drilling some holes in the capacitors so the charge will leak out. :-)
73, phil, K7PEH > On Sep 29, 2015, at 3:28 PM, Steve Glickstein <[email protected]> wrote: > > I notice this too with my K3and TXMon. It appears to occur in the Test Mode > after I've previously used the transmitter. My guess is that there may be a > capacitor or two holding some voltagefrom the prior real transmission. If I > use the test mode first, before any transmissions, the PEP/SWR indicators on > the TXMon are both zero. > > 73, Steve W4FMD > > > On 9/28/2015 9:40 PM, Phil Hystad wrote: >> I did something tonight I have not done before since having my P3 TX Monitor >> in place. I was testing the adjustment on my paddle in TX Test Mode and I >> noticed that the P3 acted as normal — that is, no signal — with the >> exception of the bar graph for SWR. The bar graph registered an SWR of 3:1 >> (normally about 1.1:1) in response to key down while in Test Mode. Yet, the >> bar graph acts normally showing the correct SWR in TX mode (not test). >> >> I would expect that the P3 would not register anything while in Test Mode TX >> — just like before hooking up the TX Monitor. >> >> So, this is a little anomaly that others see and is this normal behavior? >> >> Thanks, >> 73, phil, K7PEH >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
