On my K3 I have an LP-Pan connected to my IF out on the main receiver and a FunCube Pro on the subreceiver IF out. The LP-Pan is setup to a Steinberg USB UR22 sound card. Therefore, I have two panadapters, one through Win4K3 for the main receiver, the second using NAP3 v5 to the funcube pro.
This give full spectrum display. I say this, because my normal operating mode with SSB is 2.8k hz and CW 250 hz dialed down to 50 hz. I play with RTTY in FSK mode at 300-400 hz. I my main receiver I have 13k hz for FM and AM, 2.8k, 2.1k, and 250k. In the sub receiver I have 2.8k only. During some DATA A modes using other digital software, I may adjust the filter settings from 3k down. CW Skimmer is setup to ready the main receiver, so it has 192khz decode. Even during contests I usually keep my SSB filter settings at 2.8k and cw at 50 hz. With Win4K3 I can see most of what I need for CW and SSB for both running and S&P. 73 Doug NA1DX www.ellmore.net/na1dx ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com