Over.... 73, Mike NF4L
> On Nov 20, 2015, at 7:35 AM, Mike Reublin NF4L <[email protected]> wrote: > > I'm not doing a a good job of explaining I think. > > The rig is at 3.524. I double-tap the Split button to equalize the VFOs, then > hold Split. > The P3 is set to a span of 10, i.e. -5 appears to the left, +5 appears to the > right. > I set the P3 to tracking mode and move the green cursor to the left edge of > the screen. > > What I'm looking for is that when I tune either the B VFO or the B marker up > band, it reaches the far right edge of the screen when I get to 3.529, > instead of reaching 3.529 when it gets just to the right of the screen center. > > In this set-up moving the B marker moves the A & B cursor and the marker and > changes the center freq. displayed on the screen. That isn't desirable. > > I don't want to change the span, just the amount of real estate it covers. > > 73, Mike NF4L > > >> On Nov 19, 2015, at 2:00 PM, Alan <[email protected]> wrote: >> >> Hi Mike, >> >> On 11/19/2015 10:17 AM, Mike Reublin NF4L wrote: >>> >>> So is there a way to have that almost full screen from the A cursor >>> on the left edge to the right side of the screen cover 5 KHz? It sure >>> would make it easier to find the sweet spot in the pileup. >> >> In tracking mode, if you set the span to 5 kHz and adjust the CENTER control >> until the VFO A cursor is right at the left edge of the screen, then it will >> display from the VFO frequency to 5 kHz above it. As you tune the VFO you >> will always see 5 kHz just above the VFO frequency. >> >> 73, >> >> Alan N1AL >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
