Hi Barry, Make sure you don't have a cable plugged into the K3s Line In jack. 73, Fred KE7X
For all KE7X Elecraft books, see www.ke7x.com ________________________________________ From: Elecraft <[email protected]> on behalf of Barry N1EU <[email protected]> Sent: Saturday, December 12, 2015 6:46 AM To: elecraft; [email protected] Subject: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec Would appreciate any tips to getting the N1MM Logger+ soundcard voice keyer properly keying/driving my K3s via the internal USB soundcard. My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio CODEC" selected as my Radio 1 output device. I've got MIC + LIN On and I see the wav file properly moving the level meter in Windows sound and the level is set at 100, but no tx audio on the K3s. It appears that everything is working as it should in Logger+. Is there a separate LIN level control I need to adjust on the K3s or some other reason I'm not seeing tx audio being driven? Thanks & 73, Barry N1EU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
