Have you set the output levels on the OS driver? In mine, that should
be at or near max output...
Rick nhc
On 12/12/2015 8:59 AM, Barry N1EU wrote:
I've gotten many good tips but my USB audio is still dead. So I
simplified my attempt like this:
Mic+Lin off
Mic Sel Line In
Line Level 60 (max)
Nothing plugged into Line In
Set up Audacity loop playing audio file with Speaker output as USB Audio Codec
I see the Windows Sound Playback level jumping up and down as expected
- audio is going to the device
Push PTT on K3s and absolutely no tx audio
Is there anything I'm possibly missing?
Thanks & 73,
Barry N1EU
On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU <[email protected]> wrote:
Would appreciate any tips to getting the N1MM Logger+ soundcard voice
keyer properly keying/driving my K3s via the internal USB soundcard.
My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
and I see the wav file properly moving the level meter in Windows
sound and the level is set at 100, but no tx audio on the K3s. It
appears that everything is working as it should in Logger+. Is there
a separate LIN level control I need to adjust on the K3s or some other
reason I'm not seeing tx audio being driven?
Thanks & 73,
Barry N1EU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
