Thanks Fred, I didn't. I've got Mic+Lin working fine with another soundcard but can't get the USB audio to play through.
73, Barry N1EU On Sat, Dec 12, 2015 at 2:01 PM, Cady, Fred <[email protected]> wrote: > Hi Barry, > Make sure you don't have a cable plugged into the K3s Line In jack. > 73, > Fred KE7X > > For all KE7X Elecraft books, see www.ke7x.com > > ________________________________________ > From: Elecraft <[email protected]> on behalf of Barry N1EU > <[email protected]> > Sent: Saturday, December 12, 2015 6:46 AM > To: elecraft; [email protected] > Subject: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec > > Would appreciate any tips to getting the N1MM Logger+ soundcard voice > keyer properly keying/driving my K3s via the internal USB soundcard. > My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio > CODEC" selected as my Radio 1 output device. I've got MIC + LIN On > and I see the wav file properly moving the level meter in Windows > sound and the level is set at 100, but no tx audio on the K3s. It > appears that everything is working as it should in Logger+. Is there > a separate LIN level control I need to adjust on the K3s or some other > reason I'm not seeing tx audio being driven? > > Thanks & 73, > Barry N1EU > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
