Dave,
What do you see on the display when that happens? If there is no TX RF
present, you should see a straight line. If you are seeing an envelope
display, then the K3 is actually going into transmit.
If you have a computer connection and also have the K3 menu parameter
for PTT-KEY set to RTS or DTR, I would be suspicious that your computer
is putting the K3 into transmit. Set PTT-KEY to OFF-OFF and see if the
problem goes away. If it does, there is nothing wrong with the K3/P3
and your fix will be at the computer or whatever software application
you are using.
73,
Don W3FPR
On 8/11/2016 5:30 PM, David F. Reed wrote:
Using my P3 monitor, set to display when TX is going on, sometimes
goes into displaying TX for a few seconds while I am receiving.
Has anyone else seen this, and know of a fix?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
