Don,
thanks for the help; I will answer your questions in line between them...
On 8/11/2016 22:29, Don Wilhelm wrote:
Dave,
What do you see on the display when that happens? If there is no TX
RF present, you should see a straight line. If you are seeing an
envelope display, then the K3 is actually going into transmit.
I see an envelope, but not the same as when talking; it looks like a
horizontal tear drop.
If you have a computer connection and also have the K3 menu parameter
for PTT-KEY set to RTS or DTR, I would be suspicious that your
computer is putting the K3 into transmit. Set PTT-KEY to OFF-OFF and
see if the problem goes away.
They were, SET to TX in DXLab Commander; I have changed them to OFF.
If it does, there is nothing wrong with the K3/P3 and your fix will be
at the computer or whatever software application you are using.
Well, its not fixed, it is still doing it, and I note that the K3 is
staying in receive all the while; to TX led, RX not interrupted.
73 de Dave, W5SV
73,
Don W3FPR
On 8/11/2016 5:30 PM, David F. Reed wrote:
Using my P3 monitor, set to display when TX is going on, sometimes
goes into displaying TX for a few seconds while I am receiving.
Has anyone else seen this, and know of a fix?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
