Howard,
thanks for the idea; I now have things set as you suggest. Because it
was intermittent it may take a while to know if its "fixed" or not, so I
will report back after more testing. Thanks again for the idea.
73 de Dave, W5SV
On 8/12/2016 01:48, Howard Stephenson wrote:
Dave,
Try this from P3 MCU 1.60 / SVGA 1.34 / March 21, 2016 release notes:
Enable/disable TX sensing at the TxMon coupler: Added TxSensEn to TxMon
sub-menu. This allows enabling/disabling of transmit sensing at the
coupler. For K3 and K3S users, TxSensEn can be set to “disabled”, which
will use the serial connection from the K3 to determine the TX state.
Setting TxSensEn to “enabled” will use forward power sensed at the TxMon
coupler to determine TX state (useful for non-Elecraft radios).
73
Howard Stephenson K6IA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
