Likewise make sure the K3 output power for 40 meters, for the KPA if you have the per-band power set, has not been somehow set to zero.
- Jack, W6FB > On Sep 17, 2016, at 5:51 PM, Guy Olinger K2AV <[email protected]> wrote: > > If you have the KAT3 in the K3, make sure you haven't accidentally changed > the output to the SO239 which DOESN'T have the KPA500 attached. Changed by > tapping the ANT button. That setting is remembered by band. So if you > accidentally tap it, it's moved to the other SO239 on the back of K3, and > stays that way. Check anything that is remembered by band, including power > level settings. > > 73, Guy. > > On Sat, Sep 17, 2016 at 8:24 PM, Robert Biamonte <[email protected]> wrote: > >> Hello, >> Yesterday all was fine, and today the KPA500 will not transmit on 40m. >> All other bands show normal operation and output. It is connected to a K3. >> Any thoughts before I open the covers? >> >> 73, >> Rob W3OMW >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
