Thanks Mike for the quick response! Ant 2 was selected for 40m.
Ant 2 is my dummy load which I may have selected during the testing of the new
Windom antenna. All is well with the ether now. *G*
> On Sep 17, 2016, at 8:37 PM, Mike Flowers <mike.flow...@gmail.com> wrote:
> Hi Rob,
> One of my embarrassing errors is that the K3's ANT selection is by band - so
> if you've inadvertently selected ANT2 for 40M, etc. no 40M RF may be getting
> to the KPA500.
> Seems very odd that just 40M is not working.
> Just a thought.
> - 73 and good DX de Mike, K6MKF, Past President - NCDXC
>> -----Original Message-----
>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
>> Sent: Saturday, September 17, 2016 5:24 PM
>> To: firstname.lastname@example.org
>> Subject: [Elecraft] KPA500 Stopped working on 40
>> Yesterday all was fine, and today the KPA500 will not transmit on 40m.
>> All other bands show normal operation and output. It is connected to a K3.
>> thoughts before I open the covers?
>> Rob W3OMW
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> delivered to mike.flow...@gmail.com
Elecraft mailing list
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com