Sorry , I meant to type Guy…. Thank you for the quick response
> On Sep 17, 2016, at 8:51 PM, Guy Olinger K2AV <[email protected]> wrote: > > If you have the KAT3 in the K3, make sure you haven't accidentally changed > the output to the SO239 which DOESN'T have the KPA500 attached. Changed by > tapping the ANT button. That setting is remembered by band. So if you > accidentally tap it, it's moved to the other SO239 on the back of K3, and > stays that way. Check anything that is remembered by band, including power > level settings. > > 73, Guy. > > On Sat, Sep 17, 2016 at 8:24 PM, Robert Biamonte <[email protected] > <mailto:[email protected]>> wrote: > Hello, > Yesterday all was fine, and today the KPA500 will not transmit on 40m. > All other bands show normal operation and output. It is connected to a K3. > Any thoughts before I open the covers? > > 73, > Rob W3OMW > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > <http://mailman.qth.net/mailman/listinfo/elecraft> > Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> > Post: mailto:[email protected] <mailto:[email protected]> > > This list hosted by: http://www.qsl.net <http://www.qsl.net/> > Please help support this email list: http://www.qsl.net/donate.html > <http://www.qsl.net/donate.html> > Message delivered to [email protected] <mailto:[email protected]> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
