That's why we use a CM500
On 10/16/2016 3:18 PM, Jim Brown wrote:
What matters is smooth (flat) response from about 200 Hz to about 3 kHz as
heard at the ear of the operator. The laws of physics dictate that uniformity
of high frequency response is limited by diaphragm size -- the larger the
speaker, the worse it sounds off axis. The speaker built into the K3 is a nice
small one, so it has pretty good off axis response, but it faces straight up.
In most shacks, the highs bounce off of nearby surfaces to get to the
listener. A front-facing loudspeaker will have flatter response, but takes up
more space on the operating desk.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
