John, One should do CAL PLL first and then do CAL FIL, but your 40 meter problem will prevent you from doing CAL PLL anyway - see your query about that for more help.
73, Don W3FPR > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of John [K7SVV] > Sent: Sunday, April 30, 2006 6:13 PM > To: [EMAIL PROTECTED] > Cc: [email protected] > Subject: Re: [Elecraft] K2, Freq readout > > > Don, > That may be part of the problem. I did the CAL FIL and then the CAL > PLL failed. Since I had just started setting this up I felt I > wouldn't lose > much by powering up with 4, 5, and 6 depressed abd haven't gone back to do > it again. This may be why the frequency doesn't change (no > lookup tables). > > John [K7SVV] > > > On 4/30/06, Don Wilhelm <[EMAIL PROTECTED]> wrote: > > > > Carel, > > > > You8 did not specify, so I must ask -- did you alos do CAL FIL > before you > > checked the result. It is necessary that you do both CAL PLL > and CAL FIL > > (for each BFO) after adjusting the refcerence oscillator. > > > > 73, > > Don W3FPR > > > > > -----Original Message----- > > > > > > Seems that something strange is going on with my K2 (-: > > > Reading through the responses it strengthened my feeling I did > > > the procedure > > > (as described by Wayne, n6kr getting an exact difference of 10.000 MHz > > > between tp1 and tp2) correct. But my readout is still approx > 1 KHz off. > > > > > > Will give it another go (-: > > > > > > 73's, > > > Carel. > > > > _______________________________________________ > > Elecraft mailing list > > Post to: [email protected] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > > > -- > John [K7SVV] > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
