Richard,
I had a similar problem with the K3S not stopping transmit. Finally fixed it
by changing the stop bit in the radio settings from two to one.
Dick, K8ZTT
On Thursday, February 22, 2018, 9:32:59 PM MST, Richard
<[email protected]> wrote:
Maybe I’m missing something, but the “timing” problem with which some of us
are fighting has nothing to do with computer clock accuracy. Even if the
computer time is off, it’s the only time reference WSJT-X has to work with.
So the instant the computer tells the software it’s time to transmit, BANG!
WSJT-X goes into transmit RIGHT NOW, as it should, late or not, the software
doesn’t know and doesn’t care.
Our problem is that when WSJT-X goes into Transmit at the top of the new
segment and tells the K3S to transmit, the K3S DOESN’T transmit. Its almost
always late by 2 or 3, sometimes 4 or 5 full seconds. In my case, it eventually
doesn’t transmit AT ALL!
That’s not a software problem or a computer clock problem. It looks like a K3S
problem, and I’d sure like to see the solution before I dump this radio.
Richard - W4KBX
> On Feb 22, 2018, at 8:36 PM, Bob McGraw K4TAX <[email protected]> wrote:
>
> If you are seeing a majority of the decodes in which the DT is less than <0.5
> seconds, your computer clock is close enough for reliable contacts and
> decodes. The software should handle decodes with a DT up to 2.0 seconds, but
> in many cases this depends largely {very largely in fact} on signal quality.
> Both as transmitted and received.
>
> 73
>
> Bob, K4TAX
>
>
>
> On 2/22/2018 7:28 PM, Nr4c wrote:
>> Check the clocks on the computers. Sync them to a time server.
>>
>> Sent from my iPhone
>> ...nr4c. bill
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
