And.... isn't it the case that the SignaLink is a 16 bit device? That Tascam US 100 is also 16 bits, but it has been replaced by a model that has 24 bit/96 KHz sampling.. indicating a high quality interface.
73 de Ray K2ULR KX3 #211 -----Original Message----- From: Jim Brown <[email protected]> To: elecraft <[email protected]> Sent: Fri, Mar 9, 2018 1:41 am Subject: Re: [Elecraft] Planning the next filters On 3/8/2018 10:18 PM, Bill Frantz wrote: > This problem occurred with a SignaLink. That's not a very good interface. It helps to have an clip light or other digital level indicator on the interface for the received signal. My Tascam US100 has a green signal presence light and a red one for clip, which makes it easy to stay out of trouble. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
