I have used the noise gate as well with success. I do sense a little clipping when my background noise, furnace and dehumidier fans running on high. Do you have the equalizer set higher levels or lower on the upper audio range?
73, Bill K9YEQ -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Richard Sent: Saturday, March 17, 2018 7:54 PM To: Elecraft Reflector <[email protected]> Subject: [Elecraft] K3S TX Noise Gate When I listen to myself in the monitor while setting Tx EQ and compression, I hear the fans in the background, so I thought I’d try the Transmit Noise Gate. I was a recording engineer, so I know what a gate is and what it should sound like. When I follow the manual instructions on how to access it through CONFIG TX GATE, how to tap 1 to turn it on and off, and how to use VFO A to adjust it, nothing happens. Zero. There is absolutely no gate action, no change in the sound as I run the adjustment from one end to the other. What might I be doing wrong? Richard - W4KBX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
