Bill, Tx EQ: 50 = -16 100 = -12 200 = -6 400 = 0 800 = 0 1200 = +3 2400 = +9 3200 = +12
This works well for me. Richard - W4KBX > On Mar 18, 2018, at 10:53 AM, Bill Johnson <[email protected]> wrote: > > Do you have the equalizer set higher levels or lower on the upper audio > range? > > 73, > Bill > K9YEQ > > -----Original Message----- > From: [email protected] <[email protected]> On > Behalf Of Richard > Sent: Saturday, March 17, 2018 7:54 PM > To: Elecraft Reflector <[email protected]> > Subject: [Elecraft] K3S TX Noise Gate > > When I listen to myself in the monitor while setting Tx EQ and compression, I > hear the fans in the background, so I thought I’d try the Transmit Noise Gate. > > I was a recording engineer, so I know what a gate is and what it should sound > like. > > When I follow the manual instructions on how to access it through CONFIG TX > GATE, how to tap 1 to turn it on and off, and how to use VFO A to adjust it, > nothing happens. Zero. There is absolutely no gate action, no change in the > sound as I run the adjustment from one end to the other. > > What might I be doing wrong? > > Richard - W4KBX > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
