Kenny,
I have heard of that occurring with a KX3 and just a mic - the VFO
changed with each activation of the mic PTT button.
First, make sure the soundcard cables are fully plugged in (give them a
good push). If that does not cure it, continue below.
As an immediate workaround, first change the KX3 menu MIC BTN to OFF,
and in the control program you are using with Fldigi (Hamlib or RigCat)
select PTT via CAT command.
I prefer using PTT via CAT command
I believe there may be a firmware change in the making to address the
problem - but not here yet. Watch the Firmware Release Notes.
73,
Don W3FPR
On 7/8/2018 4:24 PM, Kenneth TAnner wrote:
Trying to set up fldigi with USB sound card. Using the patch cables from
elecraft, when I plug the green cable into the radio mic port and the sound
card headphone port it causes the radio to increase vfo frequency. Is
there something I need to change on radio or in fldigi? Tia
Kenny(kf5dnc)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
