Thanks Don, knew it had to be something simple. I changed the mic btn setting. As soon as this pop-up thunder shower moves out I'll check to be sure it works. Kenny (kf5dnc)
On Sun, Jul 8, 2018, 16:04 Don Wilhelm <[email protected]> wrote: > Kenny, > > I have heard of that occurring with a KX3 and just a mic - the VFO > changed with each activation of the mic PTT button. > > First, make sure the soundcard cables are fully plugged in (give them a > good push). If that does not cure it, continue below. > > As an immediate workaround, first change the KX3 menu MIC BTN to OFF, > and in the control program you are using with Fldigi (Hamlib or RigCat) > select PTT via CAT command. > I prefer using PTT via CAT command > > I believe there may be a firmware change in the making to address the > problem - but not here yet. Watch the Firmware Release Notes. > > 73, > Don W3FPR > > On 7/8/2018 4:24 PM, Kenneth TAnner wrote: > > Trying to set up fldigi with USB sound card. Using the patch cables from > > elecraft, when I plug the green cable into the radio mic port and the > sound > > card headphone port it causes the radio to increase vfo frequency. Is > > there something I need to change on radio or in fldigi? Tia > > Kenny(kf5dnc) > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
