Brian,
VFO Scanning should happen only if Scanning is turned on in the menu.
That has nothing to do with the mode selection - scanning can take place
in any mode.
The main reason for using DATA A is that compression is set to zero, the
equalization is set flat, and in the K3/K3S you can set MIC SEL to LINE
without interfering with whatever you have set for SSB settings.
73,
Don W3FPR
On 7/8/2018 5:39 PM, Brian Waterworth wrote:
Kenny, do have the kx3 set for Data A? I have notes from a few years ago
that indicates Data A must be selected or you will get the VFO scanning.
Of course this is in addition to what Don and Walter have advised: mic btn
should be off.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
