You can use VOX instead of wiring up some sort of PTT or using CAT PTT. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog)
> On Jul 8, 2018, at 2:19 PM, Kenneth TAnner <[email protected]> wrote: > > Thanks Don, knew it had to be something simple. I changed the mic btn > setting. As soon as this pop-up thunder shower moves out I'll check to be > sure it works. > Kenny (kf5dnc) > > On Sun, Jul 8, 2018, 16:04 Don Wilhelm <[email protected]> wrote: > >> Kenny, >> >> I have heard of that occurring with a KX3 and just a mic - the VFO >> changed with each activation of the mic PTT button. >> >> First, make sure the soundcard cables are fully plugged in (give them a >> good push). If that does not cure it, continue below. >> >> As an immediate workaround, first change the KX3 menu MIC BTN to OFF, >> and in the control program you are using with Fldigi (Hamlib or RigCat) >> select PTT via CAT command. >> I prefer using PTT via CAT command >> >> I believe there may be a firmware change in the making to address the >> problem - but not here yet. Watch the Firmware Release Notes. >> >> 73, >> Don W3FPR >> >> On 7/8/2018 4:24 PM, Kenneth TAnner wrote: >>> Trying to set up fldigi with USB sound card. Using the patch cables from >>> elecraft, when I plug the green cable into the radio mic port and the >> sound >>> card headphone port it causes the radio to increase vfo frequency. Is >>> there something I need to change on radio or in fldigi? Tia >>> Kenny(kf5dnc) >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
