Elecraft service set my Tune Pwr to 5.1 watts to prevent ‘inadvertent running of TX gain calibration’.
Have you tried running the TX gain calibration with the K3 Utility? -- Mike Flowers, K6MKF, NCDXC - "It's about DX!" > On Aug 14, 2018, at 5:31 PM, Dennis Moore <[email protected]> wrote: > > "No power to tune anything." Does this mean you've only tried to tune, and > haven't tried actually transmitting cw or phone? If so, and I don't know how > it would have changed, have you checked the Menu-Config-TUN PWR to see what > it is set to? If it is set to .1 it will show 0.0 > > 73, Dennis NJ6G > > >> On 8/14/2018 17:19, Don Roberts via Elecraft wrote: >> I have enjoyed the wisdom of this group and have learned so much but now it >> is my time to ask for help. My K3 is showing no power out. I have the K >> line. The relay clicks when going from 11 to 12 watts. I can set the power >> up to 110, but when I hit tune I get zere watts shown and verified by my >> watt meters. Makes no difference of mode, band, dummy load, resonant ant, or >> multiband hex beam, 80 meter horizontal loop, or 40 meter vertical. There is >> no output to tune anything. >> My last contacts showed no problems. Worked 10 meter cw, 20 and 6 meter ssb >> ok just two days ago. It seems to be receiving fine. The P3 display is >> normal, the KAT 500 and KPA 500 change bands with the K3 as they normally >> do. I have rebooted the K3 several times and have killed the master AC power >> to everything only to bring it up to the same thing. The ALC, compression, >> mic gain all register correct, where I always run them. I have checked to >> make sure the Test button has not been ingaged. Press XMIT and all I get is >> 0 W. I am sure I have forgotten something simple. Would appreciate any >> help. Thanks >> 73, Don W4CBS > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
