Jay,
If you are in data A mode, the easiest thing to do is just turn on
your VOX. The tones will turn your transmitter on. Just make sure you
set the mike/line in setting so that there are 4 bars of ALC showing and
a 5th just flickering. You may need to adjust the VOX gain, but it
should work well this way. This is what I do and have had no problems.
73,
Barry
K3NDM
------ Original Message ------
From: "JAY" <ki4...@gmail.com>
To: Elecraft@mailman.qth.net
Sent: 3/12/2019 11:23:52 AM
Subject: [Elecraft] Settings for Digital use
I have the KI03BU installed.No problem RX but unable to TX. I know there
has to be some settings I am missing.
This was installed at Elecraft.
--
73
KI4TXP JAY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html