Jay,
Do you have the soundcard (AUDIO CODEC) properly defined as the
soundcard in your application software? That is the 1st step to check.
Secondly, are you driving the soundcard output audio to a sufficient
level to illuminate 4 bars solid on the ALC meter with the 5th bar
flashing? Depending on what digital modes you are using, you may have
up to 3 controls for the transmit audio level.
Take a look at my website www.w3fpr.com article on this subject. Scroll
to the last article in the left column and click to view the document.
Ignore the common internet advice - Elecraft transceivers control power
differently than other amateur transceivers.
73,
Don W3FPR
On 3/12/2019 11:23 AM, JAY wrote:
I have the KI03BU installed.No problem RX but unable to TX. I know there
has to be some settings I am missing.
This was installed at Elecraft.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html