Bob- followed your suggestion and edited the KAT configuration Antenna tab to: Bands – ALL ; Enable - now have 1 2 and 3 checked and for Preferred – Last Used. Then saved the configuration. It had no effect on the problem
- I still can not select ant 3 for 160. In fact even after making your suggestion changes to the KAT config, can only select ant 1 for 160, 80 and 40 meters. - Cannot do the Train the Tuner on either 40 or 160 meters - Additionally have noticed that my KPA500 is not sensing and changing bands on 40 or 160m. On all other bands the KPA does shift bands. In the KPA500 Utility _ Operate TAB neither 40 or 160 show up when Tx’ing - The radio tunes and transmits fine with the KAT and KPA500 in Bypass 73 & tnx Paul w2ck ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
