Maybe this has been asked before, but, what antenna is selected on radio for 40 and 160 meters? Is RF on these bands bypassing the KOA500/KAT500
Sent from my iPhone ...nr4c. bill > On Jun 2, 2019, at 8:16 PM, Bill Frantz <[email protected]> wrote: > > A crude test for power output is to see if the dummy load gets warm/hot. > > 73 Bill AE6JV > >> On 6/2/19 at 3:15 PM, [email protected] (Andy Durbin) wrote: >> >> If neither track 160 and 40 but do track other bands then I would look at >> the >> RF signal to check its frequency, amplitude, and spectral purity. A >> dummy >> load, RF sampler, and spectrum analyser would make this easy but I don't >> know >> what equipment you have available. > --------------------------------------------------------------------------- > Bill Frantz |"After all, if the conventional wisdom was working, the > 408-356-8506 | rate of systems being compromised would be going down, > www.pwpconsult.com | wouldn't it?" -- Marcus Ranum > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
