John: If you are using the "Quadrapus cable set" that Elecraft sells for
the K3/0-RRC1258 combo, I believe the answer is "Yes." I remote to W7RN
using my K3 and don't have a K3/0 but I've coached others who do get
their configuration right and that's how they do it. Pin 4 of the RJ45
I/O connector on the back of the 1258 is the key line [pin 8 is ground]
and you can use it instead, however the Elecraft cable set takes care of
all the interconnections for you.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/22/2019 3:04 AM, John Huffman wrote:
I'm setting up a K3/0-Mini to control my K3 remotely. I would like to
use an external keyer (Logikeyer) since I don't like the timing of the
RemoteRig keyer. I have questions.
Does the KEY jack on the back of the K3/0-Mini do anything? If it
operates like a straight key I could send my keyer output to that jack.
I've seen suggestions to modify the cable to the I/O jack on the
RemoteRig box and insert the keyer output there. Does this interfere
with the other I/O functions of the K3/0-Mini?
73 de K1ESE
John
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
