SUCCESS! I now have the external keyer working with the K3/0-Mini and
RemoteRig boxes. Many thanks to Chuck N8CL for sending me his settings.
Here's what he sent.
I/O:
INO mode=keyer
out 0=keyer
out1=keyer
out2=keyer
USB RTS as PTT=com 0
USB DTR as PTT=com 0
Keyer:
enable=yes
iambic=b
all those number entries in order: 30/600/40/100/50/10/40
Serial:
com 1 mode = mode 7, cat to com 2 (remote)
com 1 baud 38,400
data=8
stop=1
parity=0
com 1 RTS/cts=no
hex=00
USB com port as com 1 = yes
com 2 mode=logical parallel with com 0
baud=38400
8-1-0
hex=00
USB com port as com 2=no
com 3(extra) mode (USB-com fsk)=mode-10 baudot rtty
I have no idea which ones worked, but the end result is that if I plug
the output of the external keyer into the KEY jack on the back of the
K3/0-Mini it works.
The next challenge is to get the RemoteRig client box to send frequency
data to N1MM+ on my computer. Help always appreciated.
73 de K1ESE
John
On 7/22/2019 6:04 AM, John Huffman wrote:
I'm setting up a K3/0-Mini to control my K3 remotely. I would like to
use an external keyer (Logikeyer) since I don't like the timing of the
RemoteRig keyer. I have questions.
Does the KEY jack on the back of the K3/0-Mini do anything? If it
operates like a straight key I could send my keyer output to that jack.
I've seen suggestions to modify the cable to the I/O jack on the
RemoteRig box and insert the keyer output there. Does this interfere
with the other I/O functions of the K3/0-Mini?
73 de K1ESE
John
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
