Ummm ... sometimes we tend to inflate the magnitude of a problem ...
just try it out. Plug a straight key [or your keyer] into the KEY jack
on the K3/0 and see if it works. I believe the odds are way better than
even that it will, especially if the cable plugged into the 1258 I/O
jack is part of the "quadrapus" cable set that Elecraft sells for
exactly this purpose.
I do not have a K3/0, I operate W7RN remotely with my K3, and the I/O
RJ45 on the back of my 1258 is empty, so I key using pin 4. However,
I've coached several with K3/0's to get configured properly for W7RN and
they plug the key, bug, or keyer into the KEY jack.
Try it out ... we're Amateurs, what could go wrong?
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/22/2019 12:47 PM, John Huffman wrote:
Mitch -
That has worked for other radios and my RemoteRig box, but the
K3/0-Mini has a connector that is already plugged into the I/O jack.
I tried taking it out and using the connector I used with other
radios, but that didn't work. I wonder if I disconnect pin 4 from the
Elecraft connector and instead connect my keyer output to pin 4 if
that will do damage or disrupt the operation of the K3/0-Mini?
73,
John
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
