Hi Conrad.
Here is the some situation.
I think in the K3 S-meter not in the AGC loop, have diff channel and
detector same as in the FT2000.
------ Original Message ------
From: "Conrad PA5Y" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 22.09.2019 22:42:01
Subject: [Elecraft] K3 AGC off mutes audio?
Hello I have a K3S with the latest firmware. I use it on EME in fact last night
was the first time. It works well but for EME I prefer to operate with the AGC
off. If I do a long press on the AGC button then AGC switches off but so does
the audio. I still see the S meter moving slightly which is strange when the
AGC is off. On all my other radios when I switch AGC off then the S meter does
not function. I assume that there is a another setting that causes this .....
or it is a bug. For now I have set the AGC threshold quite high which I may end
up doing on a permanent basis, then locals don't distort 😊
Any idea what is going on?
73
Conrad PA5Y
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
