But maybe you can “press” the VOX button with SWH or SWT. I’m away from my station so I can’t try it right now.
73 de Dick, K6KR > On Sep 22, 2019, at 15:30, Don Wilhelm <[email protected]> wrote: > > George, > > The VX command is "GET" only, so you can determine the VOX status, but you > cannot SET it. > See the K3 Programmer's Reference Manual. > > 73, > Don W3FPR > >> On 9/22/2019 6:16 PM, Kidder, George wrote: >> GE all, >> I recently tried to incorporate the VX command into some macros for my >> older K3. With the K3 utility connected directly to Com1, the VXn >> command has no effect on the VOX state, although other commands work as >> expected. I run the VOX on AUTO OFF (CW WT tap 5) to avoid startup >> problems, but returning to NOR has no effect. Is this a known bug or a >> single-unit flaw. Any others have this experience? >> I can certainly live without this feature - I have for nearly a decade, >> but it would be nice to have it in some macros. >> George, W3HBM >> Bar Harbor, ME >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
