Thanks for the prompt reply, Don. Humm. My copy of the Programmer's Reference, (Rev.G1, March 16, 2017) says on p28 "VX (VOx State; GET/SET on K3, GET only on KX2 and KX3)"
Guess I have encountered a "feature". No problem - if it's not, it's not. 73 de George, W3HBM On 9/22/2019 6:30 PM, Don Wilhelm wrote: > [This message came from an external source. If suspicious, report to > ab...@ilstu.edu<mailto:ab...@ilstu.edu>] > > George, > > The VX command is "GET" only, so you can determine the VOX status, but > you cannot SET it. > See the K3 Programmer's Reference Manual. > > 73, > Don W3FPR > > On 9/22/2019 6:16 PM, Kidder, George wrote: >> GE all, >> >> I recently tried to incorporate the VX command into some macros for my >> older K3. With the K3 utility connected directly to Com1, the VXn >> command has no effect on the VOX state, although other commands work as >> expected. I run the VOX on AUTO OFF (CW WT tap 5) to avoid startup >> problems, but returning to NOR has no effect. Is this a known bug or a >> single-unit flaw. Any others have this experience? >> >> I can certainly live without this feature - I have for nearly a decade, >> but it would be nice to have it in some macros. >> >> George, W3HBM >> Bar Harbor, ME >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to donw...@embarqmail.com >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
