Here are the thresholds 

level 1: 50 degrees 
level 2: 55 degrees
level 3: 60 degrees
level 4: 65 degrees
level 5: 70 degrees
level 6: 80 degrees

if the temperature gets above 90 degrees we throw a fault and drop into standby 
(with fault showing).

Mike va3mw

> On Sep 29, 2019, at 10:38 PM, Andy Durbin <a.dur...@msn.com> wrote:
> 
> The KPA500 offers a minimum fan speed setting which is settable by menu or 
> serial command.  Some posters have advocated setting a minimum fan speed 
> higher than zero, presumably thinking it offers some advantage in thermal 
> management.
> 
> Does anyone have any hard data that shows that the KPA500 runs cooler, or 
> with lower peak fan speed, when minimum fan speed is set above zero.
> 
> Running a rigorous test may not be easy since it would seem to require the 
> same ambient temperature, same finals starting temperature, same TX periods, 
> and same antenna system load.
> 
> I'm curious because, before CQ-WW-RTTY I configured my KPA500 to set min fan 
> speed to 1 at start of TX and reset min speed to zero 30 seconds after stop 
> of TX.  Of course the fans ran faster than min speed during TX but I don't 
> have any feel for whether the higher speeds were any more protracted than 
> before the min speed change.
> 
> Please share you experience of using min fan speed greater than zero, and any 
> data if you have it.
> 
> 73,
> Andy, k3wyc
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va...@portcredit.net 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to