All:
I purchased the AUX cable for the K3S / KPA500 to use the per-band power
option so the drive levels would stay put when the amp was in operation.
After setting the proper drive level for each band, I noticed that the
settings I chose were lost if I turned the power up on the K3S.
I thought the per-band settings might go back to their presets if I
cycled the KPA500 from operate to standby and back, but that didn't work.
If the per-band drive levels are easily bypassed, it defeats the whole
purpose of having this option.
Am I missing something?
Tony
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
