"The misconception is that there are presets and there are NOT, the K3s stores the last set power for that band/Amp Mode. The "presets" are the last power setting the operator made either manually or via software/macro based on the amplifier mode (OPER/STBY). IF you adjust the K3s power then you changed the "preset" for the amplifier mode/Band ."
That scheme seems to be set up to trap the operator. I chose to hard code the band power limits and to limit the range of manual adjustment to 120% of band max power limit when KPA500 OPER is active. That scheme allows me to make any reasonable power adjustment for the current operating situation but I revert to the hard coded power settings on band change. I could of course change my hard coded values to be user adjustable presets. However, I have not needed to change them for a long time so I didn't think the extra coding effort was justified. 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
