Do you set the proper drive level per band while KPA500 is in OPER mode? How do you power off your K3S? When POWER button is pushed for power-off, K3S saves the setting in internal non-volatile memory. Otherwise, any setting changes you made after powered on will be discarded.
73 de JH3SIF, Keith > 2020/03/12 16:36、Tony <[email protected]>のメール: > > All: > > I purchased the AUX cable for the K3S / KPA500 to use the per-band power > option so the drive levels would stay put when the amp was in operation. > > After setting the proper drive level for each band, I noticed that the > settings I chose were lost if I turned the power up on the K3S. > > I thought the per-band settings might go back to their presets if I cycled > the KPA500 from operate to standby and back, but that didn't work. > > If the per-band drive levels are easily bypassed, it defeats the whole > purpose of having this option. > > Am I missing something? > > Tony > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
