I agree with Bill, I always check the transceiver's power setting when
switching in an amp. I had 200 watt Yaesu transceivers before buying
Elecraft so I learned to be cautious. The only thing tricky about my
K3S is that since the same knob does multiple functions I have
accidentally changed my compression setting on occasion.
John KK9A
Nr4c wrote:
What wrong with the system already in place. We asvopetators need to
shoulder some responsibility in the operation of our radios.
Sent from my iPhone
...nr4c. bill
On Mar 12, 2020, at 7:37 PM, Tony <dxdx at optonline.net> wrote:
All:
How difficult would it be to implement a power limit option through
firmware to prevent exceeding per-band drive levels when the amp is
on?
A similar option is currently available on the K3S for transverter
power limits so it seems possible.
Tony K2MO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
