Christophe,
OK, the first thing you need to do is check the value (and soldering) of
C71 - it should be 120pF (marked 121).
If that is correct, you need to check continuity through relays K13, K14
and K15. The schematic shows the relays in their not-set position. K13
and K15 must be not-set, and relay K14 must be set (opposite the
position shown in the schematic).
Turn the K2 on and set the band to 40 meters, then turn it off (the
relays are latching) and do the continuity test with your ohmmeter.
73,
Don W3FPR
On 4/11/2020 12:38 PM, Christophe aufacf wrote:
hello don
I forgot to answer you no K60XV, no rework that I do not know this
option, I have the NB option provided for purchase
for the parameter D19 = N
thank you in advance
73 , Cris F8ACF
Le sam. 11 avr. 2020 à 16:52, Don Wilhelm <[email protected]> a écrit :
Christophe,
You have not yet answered 2 important questions which relate to your 40
meter operation.
1) Do you have the K60XV option installed (or do you have the Rework
Eliminators installed)?
2) What is your setting of the secondary menu D19 parameter?
The answers to those 2 questions is critical to what to do next in
troubleshooting your problem.
73,
Don W3FPR
On 4/11/2020 5:24 AM, Christophe aufacf wrote:
hello don
the frequency to find with CAL FACT 18.159 kHz
thank you in advance for your good advice
73 , Cris F8ACF
Le ven. 10 avr. 2020 à 21:21, Don Wilhelm <[email protected]> a écrit :
Christophe,
Tune the K2 to 7100kHz
Then plug the internal counter probe into TP1 and the P6 header on the
Control Board.
Enter the menu to CAL FCTR and hold EDIT
The frequency will be seen in the K2 display.
You could alternately use an external frequency counter to read the
frequency at TP1.
73,
Don W3FPR
On 4/10/2020 2:48 PM, Christophe aufacf wrote:
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
