Hi John, experienced this once or twice myself. There is a setting in N1MM+ to check. From the N1MM+ log entry window, select Config, Mode Control and in the combo box against "Mode RTTY" select "AFSK" for the appropriate Radio/VFO. That may also resolve your hung PTT; VOX should then work.
Good luck Peter M0RYB I've recently changed from FSK to AFSK, and having issues. FWIW, I am using N1MM with 2Tone as my RTTY interface, with the K3 internal sound card. First, When I go to DATA MD, it is always set to FSK D. I reset it to AFSK A and it works; however, if I change bands, it resets itself to FSK D. The AFSK A setting does not "stick" - is there a way to make the K3 remember this setting? Second, the K3 is staying in Transmit after the RTTY message is finished. I usually have to press the XMIT button to return to receive. I do not have anything setup in the 2Tone PTT box, which I suspect is the problem. I tried to use the serial DTR, but 2Tone was unable to use the serial port that N1MM was using. I also tried VOX, but did not see a difference. Any suggestions for setting up AFSK PTT? Thanks, - 73, John, N0TA -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
