John, Have you submitted these items as a bug report to the N1MM Logger+ developer team? I bet they would appreciate hearing about your issue.
73 de, Ian, NV4C On Sat, Jun 20, 2020, 6:00 PM John Reilly <[email protected]> wrote: > Here are the solutions to my questions: > 1. FSK/AFSK Mode - The solution was to set the RTTY mode in N1MM to AFSK > > 2. Intermittent failure to go to receive after transmit: There are at > least three ways to setup the K3 and N1MM for RTTY AFSK PTT: > a. Use Serial RTS for PTT > b. Use "PTT via Radio Command Digital Mode" > c. Use VOX > Note that you cannot use more than one of these at a time. FWIW, my RTTY > N1MM macros do have {RX} at the end of each line. > The first two did not solve my problem -- I still failed to return to RX > about a third of the time; however, VOX appears to have fixed the > problem. I wish I knew why the first two don't work. > > This is probably applicable to WSJTx PTT, too. > > Thanks to those who replied, > - 73, John, N0TA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
