Glad you got it working. I've assumed that, since the K2 is a kit in
which you build the case with pieces around the electronics, it is
really important that they all bond well. Especially true at 100 W.
Yes, Jim's research and publications are the go-to source for
ferrite/chokes/baluns/transformers, and he is sometimes referred to as
"The Reverend" around the NorCal clubs. He is also a hands down expert
in the audio world and in the realm of grounding/bonding. His website
[k9yc.com] also provides some gastronomical information as well as
reflections on jazz. 😉
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 9/5/2021 7:06 AM, jerry wrote:
On 2021-09-04 19:14, Jim Brown wrote:
I'm the guy that did the original work on this, beginning in 2003,
Wow. From the horse's mouth, so to speak. I am reading the paper.
Thanks, Jim!
In addition... on the side panels, I removed the paint at each and
every screw attachment point,
using a Dremel with an abrasive buff. Put it back together and...
...It now works normally. No strange behaviors, just good solid 100W RF.
- Jerry KF6VB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
