Well, it looks like there is no simple solution to this dilemma. I was hoping to (easily) be able to use the amp with either rig while both were here in the shack. Pulling the audio cable when I want to use the IC-705 with the amp isn’t practical due to the location of the radio. I changed the “Radio” setting from K3 to Analog and Serial, but with the cables attached, the result is the same - as soon as the amp is put in OPER mode it goes into transmit state (* showing on the LCD).
So, the only option for the time being is to always have the K3 powered up and on the band that I want to operate the IC-705 on. Just need to keep their frequencies separated as much as I can. Unless Jack comes up with an alternate…! :-) :-) Jim / K7TXA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com