As hinted to in Don's comments there is another reason for going with the KPA-100.
I love the fact that the KPA-100 has an integrated solid state T/R switch so you can run full QSK. Most of the imported amps are relay driven via the PTT line or RF sensing with a time delay and are not able to be keyed at normal keying speeds. Of course you could always buy an old B&W or Johnson tube T/R switch but now your running 3 boxes with cables etc. The KPA-100 is the "neatest" solution. - Tom K2TA K2 #1117 ----- Original Message ----- From: "Don Wilhelm" <[EMAIL PROTECTED]> To: "Fred (FL)" <[EMAIL PROTECTED]>; <elecraft@mailman.qth.net> Sent: Thursday, December 07, 2006 8:37 PM Subject: RE: [Elecraft] Barebone K2 Amplifier? > Fred, > > Elecraft has the KPA100 which offers automatic bandswitching and a lot of > other features. It can be driven by the barebones K2 quite nicely. > > Add an EC2 enclosure and you can have the KPA100 external and still with all > the function of the inboard unit - your basic K2 will still be ready to > 'grab and go' as a QRP transceiver. > > Pricewise - yes, it may seem like a lot in one 'ball of wax', but if you > price the components to build any external amplifier and include the > enclosure and other hardware, I believe the KPA100 price will be on a par > with others. > > OTOH, you may wish to wait until Dec 15 when the restrictions on external > amplifiers that can be driven with less than 50 watts is lifted and see what > appears on the market. But I would bet that none of them will have the > operating conveinence of the K2/KPA100 combination - not to mention the > addition of the automatic tuner the KAT100 if one does not have resonant > antennas for every band. > > 73, > Don W3FPR > > > -----Original Message----- > > > > Are there any 50 or 100 watt external amplifiers, > > that a barebone QRP K2 can drive? Is anyone > > using one, for SSB and CW? > > > > Itch'n to build nother ........... > > > > Thanks, > > Fred N3CSY > > K2 54xx, 6/06 > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.432 / Virus Database: 268.15.15/579 - Release Date: 12/7/2006 > 1:31 PM > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com