I have read through page 103 of the 'G' manual serveral times now, things do not seem to be working out. I was hoping to setup two frequencies, either in memory or with the VFOs, and scan between them.
I have setup VFOA for freqA and VFOB for freqB, and then held STORE, and then selected and held a number until SCAN is displayed. If I had two frequencies in the memory for that same band, it then scanned JUST those to frequencies. If I did not have any frequencies on that band in memory, it then 'scanned' the one frequency I put it. I then did the same thing, and held down the number key until I got AF ON, and the same thing happend. If I placed the two frequencies in spots 1 and 2, and then did this, it would scan the frequencies, hopping between them. My goal is to scan everything from freqA to freqB and back, continuously. I must be missing something obvious. -- David Wilburn [EMAIL PROTECTED] K4DGW K2 S/N 5982 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
