AWESOME response from Elecraft. That hit the nail on the head Don. Big thanks, and on a Saturday no less. -
David Wilburn [EMAIL PROTECTED] K4DGW K2 S/N 5982 On Sat, 2007-12-08 at 13:50 -0800, Don Ehrlich wrote: > David, > > Here is a very helpful message I received from Elecraft way way back when I > was having problems with scanning on 40 meters. I don't know if it > addresses your problem or not but I thought it was worth a shot ... > ------------------------------------------ > It sounds at least on 40 that you have > the channel hopping enabled somehow (as described in your manual on page > 99 second column). When your on 40, go into the menu, tap display to get > in the secondary menu (you'll see SEC) and turn the VFO knob to get to > RATES. Once on RATES hold down Menu as to edit the rates. Tap Display > and you will see one of 3 selections: CH SC, CH SC-TN, and "nor". You > want to select "nor". After this, try scanning again and see if it works > normally. If it does, than your radio was set up to channel hop. If it > doesn't than maybe your firmware is somehow damaged. Please let us know > what you find out. We will get it running correctly, 73 Richard > > Richard Trebbien AD7FZ > Elecraft Support > [EMAIL PROTECTED] > ---------------------------------------------- > > Don K7FJ > > > > > > > I'll have to give Elecraft a call next week. I worked on the phone with > > NU4I, and we went step-by-step. We mirrored commands between his and > > mine. Mine would scan memories, but would not scan from freqA to freqB. > > - > > > > David Wilburn > > [EMAIL PROTECTED] > > K4DGW > > K2 S/N 5982 > > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
