On Jan 20, 2008, at 12:44 PM, David Woolley wrote:
Tony Parker wrote:
1. The leads are too short. About a week ago Gerard, PA3GP,
proposed
extending the leads by soldering short extensions. He got no
responses so I assume this is a safe way to proceed.
I didn't have this problem with #6123. How long are the leads?
The leads are 1/8'. If I use the 1/8" spacers, there is not enough
physical
contact with the board to allow soldering.
2. The diffuser has what I assume are polarity markings. Each
LED has
the leads marked with 'A' and 'K' and the board has a '+'
indicated
for each diode. Can I assume that the 'K' is the '+', or
do I not care?
The diffuser has group 2 rotational symmetry, so it is not possible
to put it in the wrong way round.
The holes on the board are spaced 5/16" on both ends. When I insert
the diffuser
without the spacers, I can insert it either way and it looks like it
aligns properly.
I'm not seeing anything that I can use as a 'key'.
Tony
Ke6g
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
