Bill, > I have 2.7k/1.8k/500/200 in my Main but > only 2.7k/500 in the Sub. When I want to use diversity, I > just remember to use a WIDTH which will auto-select either > the 2.7k or 500. This way I can still use the 1.8k/200 for > severe QRM situations in non-diversity and the 2.7k/500 for > diversity and/or other situations.
With some thought would it not be possible to get 500 and 200 Hz filters with matched offsets so one could use bandwidth diversity in addition to antenna diversity? I will not be able to try that with my first K3 when that KRX3 arrives since the existing 500 and 250 Hz filters have different offsets but I will look at the 200 Hz filter in the second rig to see if it is close enough to the -790 Hz (measured in radio #1, specified for radio 2) to be useful. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill W4ZV > Sent: Saturday, August 30, 2008 11:47 AM > To: [email protected] > Subject: Re: [Elecraft] KRX3 questions > > > > > > David Cutter wrote: > > > > I'm hoping that for diversity I can just switch off my main > rx filters > > and > > have both with only the stock 2.7kHz filter. I only need the narrow > > roofing > > filters when I am near extremely strong local stations, > which doesn't > > happen > > much. I don't see a need to have 2 sets of roofing filters > unless there > > is > > very strong local QRM, perhaps 40m bc at night in some > parts of Eu or > > on/near a contest station. > > > > Yes you could use the K3 Utility to do that when you wanted > to use diversity. I have 2.7k/1.8k/500/200 in my Main but > only 2.7k/500 in the Sub. When I want to use diversity, I > just remember to use a WIDTH which will auto-select either > the 2.7k or 500. This way I can still use the 1.8k/200 for > severe QRM situations in non-diversity and the 2.7k/500 for > diversity and/or other situations. > > 73, Bill > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
