Doesn t happen here with your senario. Jim K4JAF
----- Original Message -----
From: "alsopb" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, September 02, 2008 6:35 AM
Subject: [Elecraft] K3 Encoder software problem?
Ran into this interesting problem. Encoder or encoder software?
K3 2.23/1.88 firmware Don't know about the lastest beta.
While operating the rig, suddenly tuning across a CW note produced jumps
in
frequency rather than a smooth change. The "speed" used was two digits
displayed after the decimal point on the frequency readout. This setting
had never resulted in this "pan pipe" effect before. Switch to "fine' and
back to two digits after the decimal and the problem goes away.
Doing some digging, here is how it can be produced here.
1) While in fine mode, press and hold the "fine" button until one digit
appears after the decimal point.
Tune across a signal and one hears the pan pipe effect.
2) Now press fine button until two digits appear after the decimal.
Tune across a signal and the pan pipe effect is still there.
In all cases going to "fine" with 3 decimal places solves this. If one
goes
directly from the three decimal display directly to the the two decimal
display all is always OK.
It seems like the 1 to 2 digit decimal change doesn't work properly.
de Brian/K3KO
--
View this message in context:
http://n2.nabble.com/K3-Encoder-software-problem--tp833743p833743.html
Sent from the Elecraft mailing list archive at Nabble.com.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
